Pedestrian Signal Control
Traffic Control
The NOVAX Series II digital pedestrian crossing controller provides pedestrians with a protected crossing opportunity at locations where crossing volumes are insufficient to warrant traffic signals. Suitable for a wide range of applications, from municipalities to school zones, the Series II Controllers are tailored for improving pedestrian access and safety across both new and existing crossings.
Key Features:
- State-of-the-Art Solution: Utilizing the latest digital technology to ensure safe and reliable pedestrian crossings with minimal traffic disruption.
- Cost-Effective: A budget-friendly alternative to full traffic signal installations, offering significant savings without compromising safety.
- User-Friendly Interface: Easy programming and operation through a keypad and LED display, making it accessible for all users.
- Flexible Programming: Customizable settings including start delay, flashing beacon timing, and adjustable flash rates to meet specific site requirements.
- Durability and Reliability: Built to last in outdoor settings, ensuring dependable performance in various weather conditions.
- Overview
- Specifications
- Ordering
- Downloads
The NOVAX Series II digital pedestrian crossing controllers represent the forefront of pedestrian signal control technology, providing a protected crossing opportunity in areas where pedestrian volumes do not necessitate full traffic signals. Designed to enhance pedestrian safety while optimizing traffic flow, the Series II Controllers are an ideal solution for urban and suburban environments.
- Nominal Operating Voltage:
- 115VAC ± 20VAC
- Operating Voltage Range:
- 85VAC to 135VAC
- Operating Power:
- 5 Watts
- Operating Temperature:
- -40 °C to +85 °C
- Storage Temperature:
- -40 °C to +85 °C
- Setup Display:
- Five 7-Segment (Red) LED’s (c/w “Sleep Mode” – shuts Display OFF when Not in Use)
- Input / Output Display:
- Eleven (11) LED (Red) 3 – Input, 8 – Output
- Keypad:
- Three (3) push switches for controller set-up
- Test Switches:
- Three (3) push switches for input test (on panel)
- Button Inputs (external):
- Two (2) normally open – contact closures Optically Isolated, 24 VDC, 0.02 A
- AC Inputs (External):
- One (1) normally open – 115VAC supply Optically isolated, 115 VAC, 0.02 A
- Lamp Outputs:
- Six (6) 120VAC tungsten rated output Solid state, fused @ 10 Amps
- Button LED Outputs:
- Two (2), low voltage 24VDC Solid state, fused @ 1/16 Amps
- Terminal Barriers:
- Accepts up to 10 AWG wire
- Interval Timers:
- Five (5), user adjustable 0 – 250 Sec, 1 second increments
- Flashing beacon start delay
- Flashing beacon duration
- Walk time
- Pedestrian clearance
- Minimum vehicle passage
- Five (5), user adjustable 0 – 250 Sec, 1 second increments
- Flash Rate:
- Qty 2 user adjustable (30 – 240 FPM, 10 FPM increments, 50% Duty Cycle, for flashing beacon and pedestrian clearance)
- PLS000635:
- PXO-II without cabinet
- PLS000635 / PLS000859:
- PXO-II c/w Hoffman NEMA Type 3R, 16Hx12Wx6D cabinet (Standard)
- PLS000635 / PLS000269:
- PXO-II c/w Pelco cast aluminum cabinet with type 1 police lock
- PLS000635 / PLS000704:
- PXO-II c/w Pelco cast aluminum cabinet with type 1B police lock (MOTH)